
If you’re missing most or all of your teeth in one jaw, you’ve probably come across two full-arch implant options: All-on-4 and All-on-6. Both replace an entire row of teeth with a fixed, non-removable set of new teeth anchored to dental implants but they’re not interchangeable, and the right choice depends on your bone density, budget, and long-term goals.
At Queens Modern Dental Suite, we walk Queens Village, Hollis, Bellerose, and Cambria Heights patients through both options as part of our dental implants in Queens NY services. If you’re still getting familiar with the basics, our guide to All-on-4 dental implants is a good starting point. This article breaks down exactly how All-on-4 and All-on-6 differ, who qualifies for each, and what to expect from cost and recovery.
What Are All-on-4 Dental Implants?
All-on-4 is a full-arch tooth replacement method that uses just four implants to support a complete, fixed set of replacement teeth in one jaw. Two implants are placed toward the front of the jaw, and two are angled toward the back — a positioning technique that maximizes contact with existing bone, which is why All-on-4 often works even for patients with some bone loss. In many cases, a temporary set of teeth can be attached to the implants the same day as surgery, so you’re never without a smile while your jaw heals.
All-on-4 is typically the faster, more accessible option: fewer implants means a shorter surgical appointment, a lower upfront cost, and often less need for bone grafting beforehand.
What Are All-on-6 Dental Implants?
All-on-6 works on the same principle — a fixed, full-arch prosthesis anchored to implants — but uses six implants instead of four. Those two additional implants are typically placed in the premolar region, spreading chewing forces across more anchor points.
That extra support makes All-on-6 a stronger option for patients who want maximum long-term stability, plan to eat a wide range of foods without restriction, or have enough healthy jawbone to support more implants comfortably. It’s a heavier upfront investment, but for the right candidate, it can mean a more secure bite and potentially less strain on any single implant over time.
All-on-4 vs. All-on-6: Key Differences at a Glance
| Feature | All-on-4 | All-on-6 |
|---|---|---|
| Number of implants per arch | 4 | 6 |
| Best for | Patients with moderate bone loss or budget constraints | Patients with adequate bone and a preference for maximum stability |
| Bone grafting typically needed? | Often avoidable | Sometimes still needed, but distributes load better |
| Surgery time | Shorter | Slightly longer |
| Same-day temporary teeth | Yes, in most cases | Yes, in most cases |
| Relative cost | Lower | Higher |
| Long-term bite strength | Strong | Stronger, more evenly distributed |
| Ideal for | Simpler full-arch cases | Patients wanting extra support or replacing a larger arch |
Who’s a Candidate for All-on-4?
All-on-4 tends to be the right fit if you:
- Are missing most or all of your teeth in one or both arches
- Have experienced some bone loss but don’t want extensive bone grafting
- Want a faster path to a fixed, non-removable smile
- Are looking for the more budget-friendly full-arch option
- Want the option of walking out with temporary teeth the same day as surgery
Because the angled back implants make efficient use of existing bone, All-on-4 opens the door to full-arch implants for patients who might not otherwise qualify for a heavier implant load without significant grafting.
Who’s a Candidate for All-on-6?
All-on-6 is usually the better fit if you:
- Have good bone density and volume in the jaw
- Want the added stability of more implant support, especially for the lower jaw where bite forces are strongest
- Plan to eat a broad range of foods, including harder or chewier items, without restriction
- Are comfortable with a slightly higher upfront investment for potential long-term durability
- Are replacing a larger dental arch where extra anchor points help distribute pressure more evenly
Your dentist will confirm candidacy for either option using a 3D scan of your jaw to assess bone volume and density before recommending a path forward.
Cost Comparison: All-on-4 vs. All-on-6 in Queens, NY
Cost is one of the biggest factors patients weigh between the two, and it varies based on materials, whether bone grafting is needed, and the complexity of your case. Here’s a general range for the New York City market:
| Procedure | Typical Cost Range (per arch) |
|---|---|
| All-on-4 dental implants | $20,000 – $30,000 |
| All-on-6 dental implants | $25,000 – $35,000+ |
| Single dental implant (for comparison) | $3,000 – $6,500 |
These are general market ranges, not a quote — your exact cost depends on your imaging results, whether extractions or bone grafting are needed, and the type of prosthesis you choose. We provide an exact, no-surprises estimate after your consultation and imaging, and offer financing options for patients who need to spread out the cost.
Recovery Differences Between All-on-4 and All-on-6
Recovery for both procedures follows a similar overall timeline, but there are a few practical differences worth knowing:
All-on-4 recovery: Because fewer implants are placed, the surgical appointment and initial healing period tend to be a bit shorter. Most patients manage swelling and soreness with over-the-counter pain relief and a soft-food diet for the first one to two weeks. Full osseointegration (the implants fusing with your jawbone) typically takes 3 to 6 months before your final, permanent prosthesis is placed.
All-on-6 recovery: With two additional implant sites, initial healing and swelling can be slightly more noticeable in the first few days, though most patients are back to normal activities within a similar window. Osseointegration timelines are comparable to All-on-4, generally 3 to 6 months, though your dentist may space out healing checkpoints slightly differently given the additional implants.
In both cases, you’ll typically leave your surgical appointment with a temporary set of teeth, so you’re not without a smile during the healing period — the biggest difference is in the initial procedure length and the number of surgical sites your body is healing from at once.
Which One Is Right for You?
There’s no universal answer, it comes down to your bone structure, your budget, and how much long-term stability you want out of your new smile. Patients with more significant bone loss or tighter budgets often start with All-on-4. Patients with strong existing bone who want maximum bite strength, especially in the lower jaw, often lean toward All-on-6. The only way to know for certain which option fits your case is a consultation with 3D imaging to evaluate your jawbone.
Frequently Asked Questions
Is All-on-6 always better than All-on-4?
Not necessarily. All-on-6 offers more support, but All-on-4 is a proven, effective solution for most patients and often the more accessible option in terms of cost and surgery time. “Better” depends on your bone structure and goals, not a fixed hierarchy.
Can I switch from All-on-4 to All-on-6 later?
In some cases, additional implants can be added later if you and your dentist decide more support is needed, but it’s best to choose the right option from the start based on a full evaluation, rather than planning to upgrade afterward.
Do All-on-4 and All-on-6 both give me a full set of teeth in one day?
In most cases, yes — both procedures typically allow for a temporary, fixed set of teeth to be attached the same day as implant placement, with your final permanent prosthesis following after healing.
Which option is more affordable?
All-on-4 is generally the lower-cost option since it uses fewer implants. All-on-6 costs more upfront but may offer additional long-term stability for the right candidate.
Do I need bone grafting for All-on-4 or All-on-6?
It depends on your bone density. All-on-4 is often designed to avoid the need for grafting by angling implants into available bone, while All-on-6 sometimes still requires some grafting depending on your case. Your dentist will confirm this with imaging.
How long do All-on-4 and All-on-6 implants last?
With proper care, both options can last many years often decades with regular checkups, cleanings, and good oral hygiene. Neither the number of implants nor the specific method significantly shortens overall lifespan when the case is planned correctly.
Where can I get All-on-4 or All-on-6 dental implants in Queens, NY?
Queens Modern Dental Suite offers both options as part of our dental implants in Queens NY services, serving patients throughout Queens Village, Hollis, Bellerose, Cambria Heights, and Floral Park.
Ready to Find Out Which Option Is Right for You?
The only way to know whether All-on-4 or All-on-6 is the better fit is a consultation with detailed imaging of your jaw. Dr. Lassegue and Dr. Buchanan will walk you through your bone structure, your options, and your exact cost — no pressure, no obligation.
Book My Free Implant Consultation or call 718-217-8700 to get started.